Hammered sparkling sterling silver wedding bands or ring set

RG809

This hammered sparkling sterling silver ring set combines handmade with pure elegance. The rings were sawed by hand as flat metal strips from 18 gauge sterling silver and shaped into rings by hammering over a steel ring mandrel with a nylon mallet until the ends are in perfect alignment. Using an acetylene torch and silver solder, the seams were soldered together and the rings were shaped to perfection on the mandrel. The edges were hand filed and the seam carefully polished until nearly invisible.

These rings are a 5 and 7 and measure 4 mm and 3 mm width, but can be ordered in any custom size, by simply entering your sizing in the check out notes. I can also stamp and engrave the inside with a date or short words like love or forever.

My hubby and I wear these hammered sterling silver rings as simple yet extremely tasteful low profile wedding bands. With the hammered texture and our active lifestyles, you'll never notice scratches or tarnishing and there is no patina to destroy or rub off. Even after several years the hammered finishes provide a sparkling shine in the light. These rings can also be stacked on the same finger or be worn as fitted toe rings.

Custom orders and requests are always welcome. Please don’t hesitate to contact us or call any time with questions and special requests. Thanks.. Nici


Type: Ring