nicilaskin — metal tutorial
seagull tiebar - fresh from the bench
Posted by 36877008 on
Today I made a seagull tie bar out of sterling silver and added some stones to it . I used 18 gauge sterling silver, 2 x 3mm serrated bezel cups and 2 x 3mm black Onyx cabochons. what else you need jewelry saw and 1/0 saw blades chasing tools or screw drivers, a hammer , a nylon hammer or rawhide hammer steel wool or sandpaper if you do not have a flex shaft or dremel for polishing a torch , flux, solder , pickle solution patina ( liver of sulfur or black max ) draw your bird on the sheet...