nicilaskin — etch copper
etch a sketch or how to etch copper
Posted by 36877008 on
Take a piece of copper - I used a 1 x1 inch square . Seal the back with nail polish or lacquer and wait until dry. After the polish is dry , clean your copper thoroughly with alcohol and q-tips . Do not touch again . I use gloves after the cleaning part. Take a Sharpie and draw whatever you like- have some fun !!! Wait until dry and trace again with the sharpie . take a glass container or an old plastic cup and pour a bit of your etching mordant . Be careful not to splash . Wear...